Thin Recessed Panel Light

Thin Recessed Panel Light

OVERVIEW

LED panel light surface mounted The overall dimensions are optional, directly embedded and fixed, and installed with suspender, which perfectly matches the conventional keel (300x1200mm), metric keel (295x1195mm), and English keel (305x1205mm); Surface mounted lamp panel can be directly mounted on the ceiling. The overall dimensions can be customized, with the maximum length of not more than 2.4 meters and the width of not more than 0.6 meters.

PRODUCT

FEATURES

LED panel light Surface Mounted office lamp body adopts a diffuser mask, and the light source plate is pasted with 2835/3030 LEDs with optical lenses.

The lamp body is made of high-quality cold-rolled sheet, and its surface is treated by electrostatic spraying. It will not change color or fade after 30000 hours of use. Reasonable use of effective light, uniform and soft light effect, high light efficiency, no glare.

The light source and lamp body are perfect and soft, and the light is invisible, with external Queendom’s drive.

BENEFITS

The square surface-mounted LED panel light  adopts a high-quality die-cast aluminum frame with high thermal conductivity, and the surface of the frame is spray-coated.

The light guide plate is made of acrylic, which has high light transmittance. It uses PS diffusion plate, which has high light guide rate, soft and uniform light effect, and no dark areas.

Using high-brightness 2835 lamp beads, side-emitting principle, visible light but not visible, high light efficiency and high color rendering.

Using Queendom’s independent constant current isolation driver, it is easy to install and maintain, and perfectly matches the light source. The entire lamp can reach more than 180LM/W.

LED panel lights are suitable for hanging and ceiling installation.

The lamp body has a 5-year warranty, the driver has a 2-year warranty, and the light source can be used for 30,000 hours.

APPLICATION

Offices, schools, shopping malls, hospitals, hotels, etc.

Matters needing attention:

This product is an indoor lamp and does not have waterproof function. It is prohibited to use in outdoor, wet, high temperature, totally enclosed or flammable and explosive places.

If the product is not used for a long time, it should be stored in a cool, dry and clean environment.

Before use, make sure that the input voltage is consistent with the marked voltage, otherwise the lamp tube will be damaged.

This product does not have dimming function, please do not use it with dimmer.

In case of failure in use, do not open or replace the parts without the consent of the manufacturer to prevent accidents or inconvenience to the quality assurance.