Especificaciones de iluminación | Category: Solar & Outdoor

Solar & Outdoor Especificaciones de iluminación

Published: September 2026 | Category: Especificaciones de iluminación | Keywords: solar LED light specs, outdoor lighting specifications, solar street light, solar flood light, off-grid lighting, IP66 outdoor LED


1. Overview

Solar LED lighting combines photovoltaic generation, battery storage, and LED output in a self-contained system. These off-grid fixtures are deployed in remote locations, rural roads, parks, and commercial perimeters where grid connection is unavailable or cost-prohibitive. Key performance metrics extend beyond luminous flux to include autonomy (nights of operation without recharge), solar panel efficiency, and battery cycle life.

2. Product Categories

Solar Street Lights

All-in-one and split-type solar street lights for rural roads, community areas, and perimeter security. 20W-120W.

View Products →

Solar Flood Lights

Solar-powered area lighting for yards, parking lots, and signage. Motion sensor activation for energy saving.

Solar Garden Lights

Decorative solar lights for landscaping, pathway, and park illumination. Low-output, high-aesthetic fixtures.

Grid-Tied Street Lights

Mains-powered LED street lights with optional solar backup for grid- unreliable areas.

3. Complete System Specifications

ParameterSpecification RangeNotes
LED Power20W – 120WLED module rated power
Luminous Flux1,600 – 13,000 lmActual output depends on dimming profile
Solar Panel Power30W – 200W (mono/poly)Monocrystalline preferred for efficiency
Solar Panel Efficiency18% – 23%Mono > Poly in all conditions
Battery TypeLiFePO4 (preferred) / Li-ion / GelLiFePO4: 2000+ cycles, safe, wide temp
Battery Capacity300Wh – 1200WhFor 2-5 night autonomy
Battery Cycle LifeLiFePO4: 2000+ / Li-ion: 800+ / Gel: 500+At 80% DoD, 25C
Autonomy2 – 5 nights (rainy/cloudy)Without solar recharge
Charge Time4-6 hours (full sun)MPPT controller for max efficiency
CCT3000K / 4000K / 5000K / 5700K5000K standard for street lighting
IRCRa70+ (standard) / Ra80+ (premium)Higher CRI for pedestrian areas
Grado de protección IPIP65 / IP66 / IP67IP66 minimum for outdoor
Wind RatingUp to 150 km/h (42m/s)Mounting pole and bracket rated
Operating Temp-30C to +60CBattery performance degrades below 0C
ControllerMPPT with smart dimmingMotion sensor + time + light control modes
LifespanLED: 50,000h / Battery: 5-8 yearsBattery is limiting component

4. Smart Control Modes

ModeOperationEnergy Use
Time ControlFull brightness for X hours, then offHighest
Motion Sensor20% dim, 100% when motion detectedLowest (extends autonomy 3-5x)
Dual-Period100% first 4h, 50% next 4h, 20% afterMedium
AdaptiveAuto-adjust based on remaining batterySmart
Remote (IoT)4G/NB-IoT remote monitoring & controlVariable

5. Sizing Methodology

Solar Light Sizing Example

Given:
– Target: 40W LED, 8 hours/night operation
– Location: 30 degrees latitude, 5 peak sun hours
– Required autonomy: 3 nights (rainy days)

Daily energy need = 40W x 8h = 320Wh
Battery capacity (with 80% DoD) = 320Wh x 3 nights / 0.8 = 1,200Wh
Solar panel (with 70% system efficiency) = 320Wh / (5h x 0.7) = 91W
Recommended: 100W solar panel + 1,200Wh LiFePO4 battery + 40W LED module


Related Resources

Design: Guía de diseño de iluminación
Installation: Guías de instalación
Case Study: Rural Solar Lighting Case
Products: Outdoor LED Products

Need a solar lighting system sized for your location?

Request Solar Sizing


Downloadable Specifications

Installation guides and product datasheets for solar and outdoor lighting products:

DocumentProductFormato del archivoDescargar
Solar Lights Installation GuideAll Solar ProductsFormato PDF para archivo.Descargar
QUEENDOM LED Lighting CatalogAll Outdoor ProductsFormato PDF para archivo.Descargar



Leave a Reply