Especificaciones de iluminación | Category: Industrial
Industrial Especificaciones de iluminación
Published: September 2026 | Category: Especificaciones de iluminación | Keywords: industrial lighting specs, high bay LED specifications, factory lighting, warehouse LED specs, IP65 IP66 lighting
1. Overview
Industrial lighting encompasses high-bay fixtures, factory illumination, warehouse lighting, cleanroom lighting, and tunnel lighting. These environments demand high lumen output, exceptional durability, thermal resilience, and compliance with safety standards. This specification reference covers the key performance parameters for Queendom industrial LED lighting products.
2. Product Categories
Luminarias LED High-Bay
150W-600W UFO and linear high-bay fixtures for facilities with 6m+ mounting heights. Lumen output: 18,000-78,000 lm.
Cleanroom Lights
IP65 sealed panel lights for pharmaceutical, semiconductor, and food processing cleanrooms. Low particle emission design.
Tunnel Lights
Vibration-resistant LED tunnel fixtures for road and rail tunnels. Anti-glare design with IP66 rating.
Emergency / Sensor Lights
Battery-backed LED emergency lights with motion and daylight sensors for industrial safety compliance.
3. General Specifications
| Parameter | Specification Range | Notes |
|---|---|---|
| Power Range | 50W – 600W | Depends on fixture type and mounting height |
| Luminous Flux | 6,000 – 78,000 lm | Measured at 25C ambient, Tc=85C |
| Efficacy | 130 – 170 lm/W | System efficacy including driver losses |
| CCT Range | 3000K / 4000K / 5000K / 5700K | 4000K/5000K standard for industrial |
| IRC | Ra70 / Ra80 / Ra90 | Ra80 standard; Ra90 for inspection areas |
| Beam Angle | 60, 90, 110, 120 degrees | Interchangeable lenses |
| Grado de protección IP | IP54, IP65, IP66, IP67 | IP65 minimum for industrial environments |
| IK Rating | IK08 – IK10 | Impact resistance for industrial safety |
| Operating Temp | -40C to +55C | Cold storage: -40C rated; foundry: +55C |
| Input Voltage | 100-277V AC / 100-305V AC | Wide voltage range, global compatibility |
| Power Factor | PF > 0.95 | At full load, 230V/50Hz |
| Distorsión armónica total (THD) < 15 %. | < 20% | IEEE 519 compliant |
| Dimming | 0-10V / DALI / PWM / Sensor | Dim-to-off and daylight harvesting options |
| Lifespan (L70) | 50,000 – 100,000 hours | LM-80 / TM-21 verified |
| Garantía | 5-7 years | Standard industrial warranty |
4. Application-Specific Requirements
4.1 Cold Storage Warehouses (-30C to -40C)
Cold storage environments require LED drivers rated for -40C cold start. Standard drivers may fail to ignite at these temperatures. PCB materials must withstand thermal cycling from -40C to +25C. Silicone encapsulants are preferred over epoxy for low-temperature flexibility. Recommended: IP65+ rated, -40C cold-start certified fixtures with frost-resistant lenses.
4.2 Cleanroom / Pharmaceutical (ISO Class 5-8)
Cleanroom lighting must not introduce particulate contamination. Fixtures use sealed housing with gasket seals (IP65+), smooth surfaces without crevices, and chemical-resistant finishes for IPA and hydrogen peroxide wipe-down. Recessed installation eliminates surface dust accumulation. Recommended: Ra90 for visual inspection, 500-1000 lux at working plane, flicker-free drivers.
4.3 Heavy Industrial / Foundry (+55C ambient)
High-temperature environments require derated LED drivers and oversized heat sinks. At +55C ambient, LED junction temperature can approach maximum limits. Specify fixtures with thermal derating curves that maintain L70 > 50,000h at the actual operating temperature. IK10 impact resistance is essential for areas with overhead cranes and heavy machinery.
5. Compliance & Certifications
| Certificación | Garantía estándar | Applicable To |
|---|---|---|
| CE / RoHS | EU Directive | All products (EU market) |
| UL / ETL | UL 1598 / UL 8750 | North American market |
| IEC | IEC 60598-1 / IEC 62471 | International safety & photobiology |
| FCC | FCC Part 15 Class A | EMI/EMC compliance |
| Certificado DLC. | DLC Premium / Standard | Energy rebate qualification (US) |
| IECEx / ATEX | Zone 1/2/21/22 | Explosive atmosphere (optional) |
Related Resources
Design: Guía de diseño de iluminación
Optical: Photometric Reports & IES Files
LPD: Densidad de potencia de iluminación Standards
Products: Industrial LED Products
Need specifications for your industrial project?
Downloadable Specifications
Product-specific datasheets and installation guides for industrial lighting products:
| Document | Product | Formato del archivo | Descargar |
|---|---|---|---|
| LED Emergency Ceiling Lamp Specs | Emergency Lighting | Formato PDF para archivo. | Descargar |
| Waterproof LED Tube Specifications | Waterproof T8 Tube | Formato PDF para archivo. | Descargar |
| QUEENDOM LED Lighting Catalog | All Industrial Products | Formato PDF para archivo. | Descargar |