5mm DIP Infrared LEDs

Technical Specifications

5mm DIP Infrared LEDs (710–940 nm)

Package Type: DIP 5mm Round (Ø5.0 mm, Through-Hole)
Dimensions: 5.0 mm (Lens) × 8.7 mm (Body Height)
Wavelength Range: 710–940 nm
Available Peak Wavelengths:
710 nm, 730 nm, 750 nm, 780 nm, 850 nm, 880 nm, 940 nm
Radiant Intensity (Ie): 5 – 90 mW/sr (Rank-specific; High power up to 90 mW/sr @ 850nm)
Forward Voltage (VF): 1.2 V – 1.6 V (typical @ 20 mA)
Forward Current: 20 mA (Continuous), 100 mA (Pulsed)
Viewing Angle: 30° (Narrow Beam) or 60° (Wide Beam)
Substrate: Silver-plated Iron Lead Frame
Lens Appearance: Water Clear Epoxy
Chip Material: Quaternary AlGaAs / GaAs
Chip Brands: Epistar, Sanan, OptoTech (Selected by performance grade)
Lead Length Options: 18/16 mm (Short) or 28/26 mm (Long)
Operating Temperature: −20°C to +85°C
Storage Temperature: −40°C to +100°C
Absolute Maximum Ratings:
Junction Temperature (Tj): +100°C
ESD Withstand Voltage: ≥2 kV (HBM)
Compliance: RoHS, REACH, CE, EN 60425 (Photobiological Safety)

Note: This series offers both narrow (30°) and wide (60°) viewing angles to suit different detection ranges. The 850 nm models provide the highest radiant intensity (up to 90 mW/sr) for long-range illumination, while 940 nm models offer completely covert operation with no visible red glow. Standard silicon photodiodes are recommended for signal reception across all listed wavelengths.

This site uses cookies to offer you a better browsing experience. By browsing this website, you agree to our use of cookies.
Privacy Policy | Terms of Service | Cookie Policy